S
TEP 3
S
TEP 4
Install Brackets to side panel.
Hand tighten or snug all fasteners to hold bracket in place but do not tighten.
F
or 2007-2009 Models’ Vehicle
BRACKET
Hex Hea Bolt(M8)
&
Spring
Washer(M8)
&
Washer(M8)
This will complete your installation. Enjoy!
Now install Step Rail on the brackets. Place the Step Rail on the installed mounting brackets.
Align the holes of Step Rail with the holes on the brackets and drop them into place. Next thread the provided Hex Head Bolt
(
M10
)
& washer
(
M10
)
& Spring washer ( M10 ) to hold the Step Rail and leave loose. Adjust the Step Rail in place to your
liking, tighten all fasteners on the brackets. Front and rear first and then the center brackets finally the Step Rail.
Hex Nut(M10)
&
Spring Washer(M10)
&
Washer(M10)
&
Carriage Bolt(M10)
Hex Nut(M10)
&
Washer(M10)
&
Spring Washer(M10)
&
Hex Hea Bolt(M10)
Hex Hea Bolt(M10)
&
Spring Washer(M10)
&
Washer(M10)
BRACKET
F
or 2010-UP Models’ Vehicle
I
NSTRUCTION MANUAL
AAPRODUCTS INC.
F
or Technical Support Call:1-888-806- 3972 / 626-332-4245
