4
with Both battery’s po) side on top.
3)
Replace the cover and your headphone is ready to
use.
HOW TO CHARGE
●
Connect the supplied power cord to the charge out
port located on the rear of the transmitter.
●
Place the headphone receiver on the transmitter
stand at their correct position and ready to
auto-charge.
●
Power off indicator light “Red” on is a signal for
low battery and required charging.
●
Power off indicator light “Red” off is a signal
for full battery and ready to use.
OPERATION
●
Turn on your audio source (computer or other audio
source) to which the transmitter is connected.
●
The Wireless headphone is auto working ON when you
ware it(The switch adjuster is auto TUNE ON).
●
Power Indicator “Green” light on, the battery is
on use.
●
Place the headphone on your head and adjust the
headband to comfortably fit your head and ears.
●
Select a perfect Channel for reception: CH1 CH2
or CH3
●
Tune the frequency adjustment control wheel
located
on the right headphone’s rear part until the Stereo
Indicator with “Red” light on, Stereo sound is
available on its best reception.
●
Tune the Volume Control to your desired listening
level.
●
Switch the Noise Filter which on transmitter to
ON to delete uneasy noise.
Battery Door
