A4Tech RH-200, Быстрая настройка

Страница: 6 / 8

6
Multi-Link Share
1.Upon sold, the codes pairing with the receiver and the headset is completed. If connecting to
more headsets, please take the receiver out from the computer
>> vertically short press
［
power switch
］
to start up the headset,
and then long press for 4 seconds to enter codes pairing mode.
If the LED fast flashes, reconnect the receiver to the computer.
If the
［
power switch
］
indicator lights up, the connection is
successful.
(Note: The wireless receiver may connect up to 4 headsets.
However, only the microphone of
［
the first connected
headset
］
works.)
2.
If connecting to the original receiver, continue to pair codes
according to the above steps.
How to charge
1. Insert one end of the charging cable into a device with USB port, such as computer and
common 5V USB adapter, and insert the other
end into the charging port on the headset.
2. The Nokia cellphone charger can also be used
for charging.
3. The charging LED lights red when the headset
is charging. Full charging only needs two hours.
and the charging LED automatically goes out
automatically when fully charged. Each full
charging can last for 8 hour operation.
Reminder:
You must fully charge before using it for the first time. You can use your fully
charged headset for up to 2 hours before it needs to be recharged.
Charging
LED
Charging port