— 3 —
Locating the RF-Mouse Receiver
Your RF-Mouse has limitations on the range or distance from the
receiver. To make sure that your mouse sends and receives properly,
refer to the following:
1.
For optimal performance, place the receiver at least 8 inches (20
centimeters) away from other electrical devices, such as the
computer, the monitor, or external storage drives.
2.
The RF-Mouse should be no farther than 3.3 feet (1.0 meter) from
the mouse receiver. This will ensure optimal communication
between the mouse and receiver.
3.
If you are working on a metallic surface, try using a mouse pad
and turning the receiver face down for better reception.
4.
Switch frequency channels to prevent interference from other RF
pointing devices. (See the following section for more
information.)
Selecting the Frequency Channel
The RF-Mouse operates on two frequency channels. To
prevent interference when using two RF Mice in close
proximity a different frequency channel should be used for
each mouse. Refer to the following to change the frequency
channel for your mouse:
1.
Set the frequency channel on the receiver to
1
or
2.
2.
Remove the battery cover from the mouse (see the
following
Inserting the Batteries
section).
3.
Set the frequency channel on the mouse to
1
or
2.
(The
frequency channel for mouse and receiver must be the
same.)
Channel Switch
