Operating Instructions
• Plug the A7K power cord into the back of the unit and the wall socket.
• Turn the rock-switch power button on, which is located on the back of the unit by the power
cord.
• Push the power button on the front of the unit.
NOTE:
The remote control or the button on the face of the unit may be used. The A7K should
come on with the fan speed and plate selection set on the low setting with the LED lights
illuminated.
• Push repeat cycle option on or off. See below for “Operating timer with repeat cycle”.
• When the repeat cycle LED light is off, the unit will run one time and stop.
• Select O
3
plate selection options:
• Push button one time for Plate 1
• Push again for Plate 2
• Push again for both plates
• Push again for no plates
NOTE:
One O
3
plate = 3500 mg/hour output, both O
3
plates = 7000 mg/hour output. Both
plates are needed for smoke odor.
• Choose fan speed:
• L for Low
• M for Medium
• H for High
• Select the timer option: 30 minutes, 1 hour, 2 hours or 4 hours
• After the unit produces ozone for the selected amount of time (30 minutes, 1 hour, 2
hours or 4 hours), the fan will continue running for an extra 30 minutes to circulate the air.
Operating timer with repeat cycle:
• When repeat cycle LED light is on, the cycle will repeat per the settings on the timer (30
minutes, 1 hour, 2 hours or 4 hours).
• The fan will continue running for another 30 minutes with the ozone plates off after the
cycle ends to help cool the unit down and to spread ozone throughout the area.
• If the timer LED light is on beside the repeat cycle indicator, the selected timer function
will repeat according to timer settings.
• The unit will produce ozone for the selected amount of time (30 mins, 1 h, 2 h or 4 h).
8
Содержание A7K
Страница 6: ...5 1 2 3 15 14 4 18 6 17 7 9 12 8 16 13 10 5 19 11 ...
Страница 12: ...11 1 2 3 ...