6
Installation Instructions
How the Aquatic 2 Works
A2Z Ozone Generators produce ozone gas which is introduced to spa water through suction
created by the spa injector. Tubing is used to connect the ozone generator to an injector
or a vacuum port provided by the spa manufacturer. The injector or vacuum ports are
sources used to pull the ozone gas out of the ozone generator and into the water. At no time
should water come in contact with the Aquatic 2. To protect the ozone generator from water
traveling backwards through the tubing connection, the unit must be mounted and plumbed
as described in this manual.
Installation Parts
• 1 installation manual
• 1 check valve
• 5 feet of tubing
• 4 hose ties
• 2 screws and plastic anchor for mounting
Installation Tools and Materials
• Phillips screwdriver
• Pliers
Unit Assembly
• The Aquatic 2 is pre-assembled and ready to install.
Mounting
• Mount the ozone generator as high as possible within the spa’s protected equipment
area or outside.
• Screws are provided for mounting but may not be appropriate for all surfaces. Substitute
proper mounting hardware as required.
