11
owner's manual
4.7 Seat height adjustment
The seat height may require adjustment.
Ask your A2B dealer to adjust it before you ride.
To determine the correct height of the seat for the rider
1.
Straddle the assembled A2B with your feet shoulder
width apart and flat on the ground.
2.
There must be at least 25 mm (1 inch) clearance (1) be-
tween the intersection of the main tube and the seat post
and (2) the crotch of the rider.
3.
The minimum inside leg height is measured from the
intersection of the top tube and seat post plus 25 mm and
the floor. The minimum inside leg height for the A2B is 68.5
cm (27 inches)
Height adjustmen
1.
The seat height can be adjusted with a 5 mm allen key
by loosening the seat
post fastening bolt.
2.
After adjustment,
check to ensure the
bolt is tightly fastened
and ensure there is no
movement in the seat
position in any direction.
3.
The seat post clamp
should be secured at
10-12 Nm.
Failure to correctly secure the seat can result in serious
injury or death.
DO NOT raise the seat beyond the 'minimum insertion'
mark on the seat pillar.
Ensure the seat clamp bolt (seat pillar - seat post) is
tightened to 27 Nm.
HY
BRID
HY
BRID
Frame Height
Frame Height
Inside Leg Height
Frame Height
1 inch / 2.5 cm
clearance
Inside Leg Height
