a2b Hybrid/24, Руководство пользователя

Страница: 10 / 52

10
Owner`s manual
Frame Heigh
t
Frame Heigh
t
Inside Leg Heigh
t
Frame Height
1 inch / 2,5 cm
Clearance
Inside Leg Height
Height adjustment
1. The seat height can be adjusted by loosening the quick release
for the saddle post.
2. Position the saddle at the desired height. Do NOT position the
saddle higher than the minimum insertion mark located on the
saddle post BY NO MEANS.
3. Push the lever of the quick release towards the frame, until it will
be closed again. The lever must not stick out to avoid danger
of injuries. The lever is safely attached if you must use efforts
to push it into the closed position. The efforts are appropriate if
the lever leaves a mark on the palm of your hand when pressing.
A properly closed quick-release cannot be moved anymore
unless it is reopened as specified above. If you can move the
mechanism slightly, open the lever of the quick release, turn the
adjusting nut by another 180° and try again.
4. After height adjustment, check if the saddle cannot be moved in
any direction.
An improperly attached saddle may lead to severe or even
fatal injuries. Ensure that the saddle clamp screw (saddle
post - saddle) has been tightened using 27 Nm.
• This user manual does not express any guarantee as to the
safe use of the A2B under all conditions.