11
11
4.3.5 Analogue mode (cont.)
It is possible to select scaling of the
picture format to fit with connected TV-
sets. This is handled in the [Aspect ratio]
drop down list where it’s possible to
choose between the different types.
[WSS] (Wide Screen Signalling) is
available in the video for signalling the
aspect ratio to be displayed by the TV
sets.
[Bitrate] can be set and this gives you
what the bitrate will be at the ASI output.
NOTE! Refer to the table in page 16
about correct values.
[Attenuation] can be choosed between 0
to -31 dB
The [Frequency] can be set in steps of
1kHz (e.g. 306.167 MHz) in all three
output modes (Analogue, COFDM or
QAM). Click [Set] to save all settings.
4 Settings (continued)
English
QAM mode (SW option)
When selecting [QAM] DVB-C
output, there are settings for Output
channel (E2 to E69) or Frequency,
QAM mode (16, 32, 64, 128 or
256QAM), Baud rate (kHz) and
Output signal attenuation
(0 to -31dB).
Note!
Some of the choices may
need optional software to be
uploaded before they can be
selected.