Page 9
1.9
Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELLE.
•
The system does not respond after you turn on the system :
-Make sure that the monitor is turned on via OSD button.
-Turn off the power and check the system’s power cord, AC adapter,
for proper connection.
•
Appear the “ No Input the Signal" :
-Check the connecting of the vga cable on I/O panel computer and power on computer.
•
Appear the “ Input Not the Supported" :
-Input signal are insuperable, reset the video mode and adjust video driver settings.
•
The appearance is not at the screen center.:
-Use “AUTO ADJUST”, refer to the Controls section.
•
The characters on the screen are too dim or too bright
-Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer to the Control section.
