If you are the unfortunate victim of a car hijacking, be sure that the thief will not get
away with your car! The engine will run only if you press III after unlocking the doors.
➠ ➠
Press I Press III Engine start
■ How to set
To use this feature you need an optional relay.
Set as described below after the installation of the relay.
➠ ➠ ➠
Open the door Key ON Press and hold 5 sec. Beep
When set on (follow the description below), the dual unlock pulse will be generated when
you press button I (unlock the doors).
➠ ➠ ➠
Open the door Key ON Press and hold 10 sec. Beep
When it comes to the crunch (or in emergency)
you can open the door without a key or remote
control by touching on the touch sensor.
1. Touch the LED 10 times.
2. The red LED turns on. (within 5 sec.)
3. Touch the first digit.
(The blue LED flashes once for every touch.)
4. The red LED flashes. (within 5 sec.)
5. Repeat the steps 3 and 4 for the next 3 digits.
6. Is PIN accepted, the doors are unlocked.
➠ ➠ ➠
10 times LED on Input 4-digit PIN Unlock
16
Convenient Features
PIN Unlock
For the touch sensor responds to the weak electric current of the finger it is
strongly recommended to remove stuff (like snow and mud) and to dry the part
around the sensor on the front windshield.
Do not use the touch sensor with the gloved finger.
(Ex.: PIN is 1578)
☞
☀
Touch 10 times
☀
LED On
☞
☀
Touch 1 time
☀
LED On
☞
☀
Touch 5 times
☀
LED On
☞
☀
Touch 7 times
☀
LED On
☞
☀
Touch 8 times
☀
LED On
•
If 5 consecutive attempts went failed within 30 min., this feature doesn't work for
the next 24 hours. (When unlocked remotely, you can use this feature again.)
•
In case of wrong number or interruption the driver is paged.
Dual Unlock Pulse
Anti-hijack
✗
To cancel dual unlock pulse : repeat the procedure above. (2 chirps)
Convenient Features
✗
To exit Anti-hijack : repeat the procedure above. (2 chirps)
In not use, you don't need to press button III for starting the engine.
