A1TECH JAZZ, Руководство пользователя

Страница: 23 / 27

- -
21
- -
Manual Valet Mode
The manual valet mode is used to add or delete remote control, disarm the system
if your remote control is lost or doesn
’
t operate, and set up the JAZZ to integrate
with your specific vehicle.
1. Open the door of driver
’ s seat and insert the key into ignition position.
2. Repeat ACC/ON five times - enter the valet mode with chirp sound and red LED
turns on steadily.
Technical Support
Warning LED on the Communication Module turns on
steadily.
Even if the system is in Valet Mode, Door Locking/
Unlocking, and Trunk Release work normally.
▶ To exit Valet mode, repeat the procedure above and with
two chirps, Warning LED turns off.
Valet Mode by Push Switch (Optional)
1. Open the door of driver
’
s seat.
2. Inset key and set to “ ON ” position.
3. Within 10 seconds, Press and hold the Valet switch for 3 seconds.
- enter the valet mode with chirp sound and red LED turns on steadily.
4. Pressing II button, ZZZZZ appears in the LCD screen.
▶
To exit Valet mode, repeat the procedure above and with two chirps, Warning
LED turns off.
Open door ACC / ON 5 time
One chirp & LED ON
Key ON Press 3 sec.
Press
Ⅱ Ⅱ
Open door
One chirp & LED ON