![A10 AX Series Скачать руководство пользователя страница 18](http://html2.mh-extra.com/html/a10/ax-series/ax-series_deployment-manual_3145588018.webp)
AX Series for SharePoint 2010 Deployment Guide
18
Figure 14: Source IP Persistence Overview
6. Click
OK
and then click
Save
to store your configuration changes.
8.5.2 APPLY IP PERSISTENCE TO THE VIP
To assign the template to the VIP:
1. Navigate to
Config Mode > Service > SLB > Virtual Server Port
.
2. From the
Persistence Template Type
drop-down menu, select
Source IP Persistence
Template
.
3. S
elect the corresponding template that was created. The name “Source IP Persistence” is used
as the template name in the example below.
Figure 15: Persistence Template Configuration
4. Click
OK
and then click
Save
to store your configuration changes.
8.6 IP SOURCE NAT
Optional: Only for one-arm deployment.
This section configures the IP Address pool to be used for IP Source Network Address Translation
(SNAT). When incoming traffic from a client accesses the VIP address (For example: 172.16.1.200), the
client requests are “source NAT-ed”, which means that the AX replaces the client’s source IP address
based on the configured address pool of the source NAT. SNAT is required when your network topology
is based on “one-arm” deployment and if you have internal clients that reside on the same subnet as the
VIP. The Source NAT template must be applied in the virtual server port for the NAT to take effect.