12
Login to this device
Connect to the same network as the device and manage the settings from PC web browser.
System requirements
The PC should meet the following requirements to be capable of configuring the system.
Network
Ethernet (10 BASE-T, 100 BASE-TX)
Web browser
Internet Explorer 7.0, 8.0, or 9.0 (SSI 3.0 or TLS 1.0 or later)
Connecting to a PC
Connect the station with a PC using PoE compatible switch.
•
Use CAT5e/6 straight cable to connect the devices through LAN port.
RJ45
RJ45
RJ45
RJ45
PC
CAT5e/6 straight cable
CAT5e/6 straight cable
Door Station
PoE compatible
switch
1
Start the PC and open a web
browser (Internet Explorer)
2
Enter the address below into the
web browser address bar
https://(IP Address of this device)/webset.cgi?login
When the IP address is IPv6, put brackets
([ ]) around it.
Display the login screen.
3
Select the language
Language for displaying contents on the Web
settings is changed.
Display the login screen of the selected
language.
4
Enter the ID and password, and
click
Initial value ID: user
Password: user
Display the setting screen.
•
Be sure to type in “https://” to login.
•
Do not login multiple times using multiple browsers
at one time on the same PC.
•
If a security warning screen appears, disregard the
warning and continue.
•
The initial IP address and Subnet mask values are
below.
IP address: 192.168.1.160
Subnet mask: 255.255.255.0
•
Contact the system administrator if the IP address
or subnet mask for the device is not known.
Notice
Set using a PC
4
Settings and Adjustments
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]