background image

                    Available from A1 Security Cameras 

    www.a1securitycameras.com email: [email protected]

BN481E82 

Eight-channel Network Recording Kit 

INSTALLATION 

PosiƟon the Camera 

❼ 

INSTALLATION 

Place the NVR

❽ 

INSTALLATION 

Connect Cameras and Peripherals 

❾ 

•  Loosen, but do not remove the set screws on either side of 

the bracket that holds the camera. 

•  Tilt the camera to adjust the Ɵlt angle (0° to +65°). Tighten 

the two locking screws on the bracket to lock the Ɵlt angle. 

•  Turn the camera module to adjust image pan orientaƟon 

(0° to +355°). 

•  Turn the camera base to adjust the rotaƟon of the camera 

(0° to +355°). 

•  Ground the unit using the ground connecƟon of the power 

supply to protect the unit from damage, especially in damp 
environments. 

•  Protect the plug and power cord from foot traffic, being 

pinched, and its exit from the unit. 

•  Do not place the unit in a wet, dusty, extremely hot or an 

extremely cold environment; and avoid environments with 
strong electromagneƟc radiaƟon. 

•  Connect an Ethernet cable to the RJ45 port for network 

access. 

•  Connect the incoming network cables from the eight net-

work cameras. 

•  Connect a VGA or HDMI cable to the rear panel and to the 

display monitor. 

•  Connect the NVR to a 100-240 VAC power supply and turn 

on the device using the On/Off buƩon. 

OPERATION 

Log in to the NVR 

❿ 

OPERATION 

Add Cameras with Smart Add 

⓫ 

OPERATION 

View Live Video 

⓬ 

•  When the network cameras and the NVR are connected to 

•  Set the Username and Password aŌer iniƟal start-up. 

same router or switch, you can use the Smart Add funcƟon 

•  Supply the default password (“admin”) for the Admin 

to add all network cameras to the NVR at the same Ɵ me 

user. 

•  Default IP Seƫngs 

•  Supply a new password. 

IP Address 

192.168.1.108 

Subnet Mask 

255.255.255.0 

Gateway 

192.168.1.1 

•  Click Live in the Main Menu. 

•  Supply answers for two confirmaƟon quesƟons in case the 

•  Change the Live screen grid if more camera channels are 

password has to be reset. 

desired. 

•  AŌer Admin Security is set, supply the Username and the 

new Password. 

Rev. 001.005.  Copyright © 2017 Dahua Technology. All rights reserved. Information contained in this document is subject to change without prior notice. Dahua does its best to provide accurate information, but cannot be held responsible for typos or mistakes. 

Отзывы: