A-Trend ATC6240V Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 41

A-Trend ATC6240V Скачать руководство пользователя страница 27

ATC6240V Mainboard Chapter 3 Award BIOS Setup

27

Memory Hole

A memory block at 15M – 16M is reserved for choice. If “Disabled” is

chosen, it means this memory block is not reserved for special use. If “15M-16M” is
chosen, it means, this memory block is reserved for other devices.

Read Around write

to enable this item will optimize DRAM read & write. If a memory

read is addressed to a location where a memory write is held in a buffer content, the
memory read will not be sent to DRAM then.

Concurrent PCI/Host

Disabled, the CPU bus will be occupied(BPRI asserted) during

the entire PCI operation. Enabled, the CPU bus is only requested before ADS#
assertion

System BIOS Cacheable

Selecting Enabled allows the caching of the system BIOS

ROM at F0000h-FFFFFh, resulting in better system performance. However, if any
program writes to this memory area, a system error may result.

Video RAM Cacheable

Selecting Enabled allows the caching of the video RAM,

resulting in better system performance. However, if any program writes to this memory
area, a system error may result.

AGP Aperture Size (MB)

Select the size of the AGP aperture. The aperture is a portion

of the PCI memory address range dedicated for graphics memory address space. Host
cycle that hit the aperture range are forwarded to the AGP without any translation. See

www.agpforum.org

for AGP information. The choice 4, 8, 16, 32, 64, 128, 256.

OnChip USB

If “Enabled”, “USB Keyboard Support” will be provided for choice.

USB Keyboard Support

If “OnChip USB” is enabled, this item will appear for choice.

Auto Detect DIMM/PCI ClK

If this item is enabled, the unused DIMM and PCI slot

clock will be disabled. If this item is disabled the unused DIMM and PCI slot will still
get the active clock signal.

Spread Spectrum Modulated

Enable / Disable this item, the BIOS will Enable /

Disable the clock generator spread spectrum .

CPU Host/PCI Clock

Use this item to set CPU base clock frequency which includes

68/34MHz, 75/37MHz, 83/41MHz, 66/33MHz, 103/34MHz, 112/37MHz,
133/33MHz, 100/33MHz, 117/39MHz, 117/29MHz, 124/31MHz, 129/32MHz,
138/34MHz and Default.

«
...
25
26
27
28
29
...
»

Содержание ATC6240V










































Отзывы:

Нет отзывов