a-them AVM 90, Руководство по эксплуатации

Страница: 32 / 68

3D Sound
MRX 1140, by default, is con fi gured for ampli fi cation for 7.1.4 main speakers, MRX 740 for 7.1 main speakers, and
MRX 540 for 5.1 main speakers. You can assign height channel information to be sent correctly to the speakers.
Height Speaker Type and Position
Two,four or six speakers may be installed in the ceiling or on the wall near the ceiling and 1 pair of Front Wide. Or, you
may place a type of height speaker referred to as Dolby- enabled on top of existing speakers. A Dolby-enabled
speaker works by bouncing height information o
ff the ceiling. Using the room layout diagrams in this manual as a
guide, select from the following possibilities to match your height speakers:
Front In-Ceiling
Front Dolby-enabled
Front On-Wall
Front Wide
Middle In-Ceiling
Middle Dolby-enabled
Back In-Ceiling
Back Dolby-enabled
Back On-Wall
3D Sound
Height 1 Front In-Ceiling
Height 2 Middle In-Ceiling
Height 3 Back In-Ceiling
Four Speaker Pro fi les
The use of one speaker pro fi le is suitable for most systems. However, the MRX/AVM allows up to four unique pro fi les
with unique speaker selections, bass management, listening position, level calibration, and Anthem Room Correction
(ARC) equalization values. Multiple speaker pro
fi les are useful if your listening room varies according to predictable
sound-altering characteristics such as screen up versus down, a door open versus closed, or stereo listening for music
vs. home theatre.
Speaker pro fi les can be set up manually using the MRX/AVM’s on-screen menu.
However, it is easier to con fi gure pro fi les using Anthem’s ARC Genesis software.
Speaker Setup
Pro fi le Name Pro fi le 1
Subwoofer 1
Front On
Front Wide On
Center On
Surround On
Back On
Height 1 On
Height 2 On
Height 3 On
•
•
•
•
•
•
•
•
•