A SYSTEMS DMP81, Руководство пользователя

Страница: 5 / 16

3
English
DMP81
1. Input Level Control 1 - 8
Every input channel is equipped with a rotary knob for
adjusting the final input level.
2. ON LED 1 - 8
Every input channel is equipped with an ON LED
which lights green when a signal is present in the input
channel, and will turn red when the signal peaks�
3. HPF (High Pass Filer) Control 1 - 8
Make adjustment by using slot screwdriver�
4. High Frequency Shelving Filter 1 - 8
Make adjustment by using slot screwdriver�
5. AUX Level Control
This rotary knob for adjusting the AUX input level�
6. SG LED (for AUX INPUT)
This LED will light up green when an output signal is
present and red when the signal peaks�
7. AUX INPUT 1/4” TRS Phone Jack
8. LIMITER LED (for MASTER OUTPUT)
Lights red when on-board limiter actives�
9. SG LED (for MASTER OUTPUT)
This LED will light up green when an output signal is
present and red when the signal peaks�
10. MASTER Level Control
This knob controls the level for MASTER output��
11. POWER LED
This LED indicator will illuminate when the DMP81 is
activated�
12. Power switch
Flick this switch to switch the unit on and off.
13. PHONES Level Control
This knob controls the level for the PHONES output
jack�
14. PHONES OUTPUT 1/4” TRS Phone Jack
For connecting headphone�
3. CONTROLS and CONNECTIONS
FRONT PANEL
15. AC Power Connector
The unit is supplied with power via a standard IEC
power cable from power source�
16. DIP Switch 1 (for adjusting setup options)
See section “ DIP Switch ”�
17. DIP Switch 2 (for turning phantom power ON/OFF)
See section “ DIP Switch ”�
18. MASTER OUT
DMP81 offers a single 3-pin Euroblock output
connector� This connector can be set as balanced or
unbalanced� (see section
Installation and Setup
)�
19. INPUT Connector 1 - 8 (Euroblock)
See section “ Installation and Setup ”�
20. INPUT Connector 1 - 8 (Balanced 1/4” TRS Insert
Jack)
See section “
Installation and Setup
”�
21. MIC-IN/LINE-IN Switch
Every input channel is equipped with a button switch
for setting MIC-IN/LINE-IN� For MIC-IN, set this button
to MIC, for LINE IN, set this button to LINE�
REAR PANEL