16
2. Tap and hold the centre of the target, the target moves to the position of
left-up.
When again tap and hold the centre of the target, the target moves the
Next position of left-down.
3. The target moves to five position (Left-up' left-down' right-up' right-down'
Center) in order, forming a period. If nicetily tap and hold the target each time,
after a period, the target is
Disappear, the device completes the calibration
process and backs to
the Device Settings menu.
3.7 About
1. Tap button on the Device Settings menu. The About Function
menu appears as shown right-up.
2. After accomplishing, tap the knob to exit.
4.1 GPS Receiver
NOTE: This page is for information only. You can view the number of satellite
signals the unit is receiving and also the strength of these signals.
1. Tap “GPS Receiver” button on the the Device Settings menu.
2. The GPS Receiver Function menu appears as shown below.
This page gives your current position in degrees longitude and latitude, your
current speed and the status of your position, i.e. Fixed 3D or Fixed Invalid etc.
The compass circle shows the satellites that the unit is receiving and the bar
chart below shows the strength of the signal from each of these satellites.
