A.R.I. Eliptix R-30 S 2W Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 15

A.R.I. Eliptix R-30 S 2W Скачать руководство пользователя страница 1

R-30 S .IOM.ENG01

R-30 S 2W

Pressure Sustaining Control Valve
2 Way

The following is a step by step narrated description of the Eliptix R-

30-S

2

W Pressure Sustaining

Valve installation, operation and maintenance processes.
The A.R.I. R-

30

Series is line of metal, diaphragm-operated hydraulic control valves.

The valves are suitable for installation in agriculture, water transmission and waterworks systems
for irrigation, landscape and infrastructure applications.
The R-

30

series has an innovative elliptic shaped diaphragm that integrates well with a wide variety

of regulating control pilots, solenoids and control accessories.
They are compatibility designed for water level control, flow control, electric & remote control as
well as pressure reducing & pressure sustaining operation.

The R-

30-S

2

-Way Pressure Sustaining Valve is designed to sustain and maintain a pre-defined level

of upstream pressure and relieve excess pressure to the downstream system.

1
2
3
...
»

Содержание Eliptix R-30 S 2W
















Отзывы:

Нет отзывов