A-PLUS AUTOMATION A44-P, Инструкция по эксплуатации

Страница: 7 / 32

7
A44-P
2.5 SURROUNDING CONDITIONS
The machine does not need special surrounding conditions. It has to be installed inside an industrial building, lit, aired
and with a compact and flat floor. The permitted temperatures go from 5° to 40° C, with a humidity level not higher
than 50% at 40° C or 90% at 20° C.
2.6 LIGHTING
Premises lighting must be conformed to the norms in force in that Country where the machine is installed and has to
guarantee a clear visibility and can not create dangerous light reflections.
2.6 NOISE EMISSIONS
In standard working conditions the Machine noise power level is:
• Acoustic Continuous Equivalent weighed pression A <70dB
• Acoustic Istantaneous weighed pression <130dB
In case of any machine modification, the above mentioned levels could be changed
2.7 TECHNICAL DATA
We have listed below the Machine’s data and technical characteristics to which you can make reference for any eventual
contact with your distributor for Technical Assistance.
TABLE 2. 7 A Tecnical data
Frames thickness (min-max) 5-80mm /
1
/
4
” - 3
5
/
32
”
Frames width (min-max) 6-120mm/ 1 /
4
” - 4” 23 /
32
”
Wedges magazine capacity n. 230
Wedges size 7, 10, 15 mm.
Wedges size on request 3, 5, 12 mm.
Pneumatic feed BAR 3-6 / PSI 40-80
Air consumption 4,0 Nl at 6 BAR - 0.14 cf
3
at 73 PS
Weight approx. 90 kg / 198 lbs
Height of working bench 960 mm / 38”
Overall dimensions 600x520x1220mm - 24" x 20" x 48"
2.8 EQUIPMENT SUPPLIED
2.8.1 Standard accessories 2.8.2 Optional accessories
• N.1 wedge claw-head mm. 7 • Metal support extensions
• N.1 wedge claw-head mm.10 • Wedges claw-heads size 3-5-12 mm
• N.1 wedge claw-head mm.15 • Horizontal clamping w/wider leaf (see Pict. 1)
• N.1 L shaped pressure pad
• N.1 Allen Wrench 5 mm. claw-head replacement
• N.1 Brass rod magnet to remove Wedges