background image

Electric Tankless 

Water Heater

Keep this manual near the water heater for future reference whenever maintenance, adjustment or service is required.

Retain your original receipt as proof of purchase.

IMPORTANT SAFETY INFORMATION ............................. 2
GENERAL INFORMATION ............................................... 5
INSTALLATION ............................................................... 11
OPERATION ................................................................... 15
TROUBLESHOOTING  .................................................... 17
SERVICE ......................................................................... 22
WIRING DIAGRAMS  ..................................................... 29
APPENDIX ...................................................................... 34

Table of Contents  ..............................Page

  

°F

°C

ENTER

°F

°C

ENTER

PLEASE DO NOT RETURN THIS UNIT TO THE 
STORE. 

Read this manual and the labels on the water heater before you install, 
operate, or service it. If you have di

  culty following the direc  ons, or 

aren’t sure  you can safely and properly do any of this work yourself: 

•    Call our Technical  Support Hotline:  

 United 

States:  1-877-817-6750

 Canada: 

   1-800-265-8520

  We can help you with installation, operations, troubleshooting, or 
  maintenance.  Before you call, write down the model and serial number from  
  the water heater’s data plate.

• Incorrect 

installa  on, opera  on, or service can damage the water heater, your 

house and other property, and present risks including 

fi

 re, scalding, electric 

shock, and explosion, causing serious injury or death.

0618

100306524_2000558984 (REV. A)

Installa  on Instruc  ons 
and Use & Care Guide

Содержание RPV series





































Отзывы: