Control Panel Concealed Installation
For the convenience of operation, the control panel may be installed on a wall near the water heater.
Installing the remote panel in the wall:
•
Dismantle the control box and remove the wire connected to the panel and the heater
•
Thread the wire cable through the fixing panel and back cover
•
Assemble the layers in the order as shown. Fix the control box to the wall by pressing firmly against
the front cover.
10
Front cover
Digital display
Back cover
Wall for
concealed
installation
Fixing panel
Wall opening
Water Filling
After all the pipes are connected, open the discharge valve of the water heater and then the feed
valve. Fill the water heater with water and exhaust the air till a uniform water stream flows out of the
hot water outlet. This indicates that the water heater has been filled up. Close the hot water
discharge valve and check all connections for any leakage. If leakage occurs, empty the water tank,
repair the leaked connection and then refill the heater with water. Do not close the feeding valve
during the filling of water.
