NEED HELP? GIVE US A CALL
833.232.9711
NEED HELP? GIVE US A CALL
833.232.9711
1
Identify drain outlet location. Do not install the drain connector onto the same
drain pipe as the garbage disposal. If drain-line must be installed on the same line
as garbage disposal, do not use the drain connector included. A garbage disposal
connector is recommended.
PRO TIP
If there is leakage from the drain bracket, loosen the bolts and slide the bracket up so the drilled hole is at
the bottom of the drain connector port.
2
Remove protective cover from back of
foam seal (N).
4
Use drain connector to mark drill
location on drain-line. Drill a 7/32" hole
on the drain pipe. Do not penetrate
opposite side of pipe.
5
Position the drain connector on sink
drain pipe above drain trap, allowing
room for drilling.
6
Securely tighten nuts (M) and screws (M).
STEP 5 - Install drain connector
DRAIN PIPE
BRACKET
NEW HOLE
3
Knock center hole out, align holes, and
attach to front plate of drain connector (L).
INSTALLATION GUIDE
6
7
WARNING
Ensure that all electrical appliances
and outlets are turned off at the circuit breaker
before working in the cabinet area.
CAUTION
Wear safety glasses to
protect eyes when drilling.
M
N
L
M
1
Apply plumber’s tape 4 or 5 times
clockwise around the nipple on top of
Tank in the same direction as threads.
2
Hand-tighten Tank connector onto
Tank nipple until secure.
4
Install the 3/8" white tubing to the Tank.
Push tubing through the
nut, collar and sleeve
into the connector.
Unscrew the compression
nut from Tank connector
to ensure tubing is
connected all the way
through the collar
and sleeve.
Slide nut to the
threads and tighten
with a wrench.
Note: Avoid
over-tightening.
STEP 4 - Install water storage Tank
3
Using mount stand, place Tank near the System Manifold. Using the 3/8" white
tubing leftover from the faucet install, connect one end to the Tank and the
other to the “Tank” port on the Manifold.
Note: Do not cross thread or over-tighten.
HOT
COLD
