A.O. Smith AO-MF-B, Руководство пользователя

Страница: 5 / 21

NEED HELP? GIVE US A CALL 877.333.7108
Before installing:
• Do not install this filtration system
where the line pressure may
exceed 100 psi. The operating
pressure range for this filtration
system is between 25 psi – 100 psi.
• Install on cold water lines only
(40° – 100° F).
• Protect unit from freezing.
• It is recommended your system
be installed indoors, out of direct
sunlight. Prolonged exposure
to light can weaken plastic
components, resulting in filter
housing failure.
• Do not install the unit on its side.
It must be installed upright to
maximize contact with media bed.
• Installation of the filtration system
must comply with existing state
and local plumbing codes. A.
O. Smith and its manufacturer
is not liable for consequential
or incidental damages due to
improper installation.
• Some local codes may require
the use of a licensed plumber or
certified installer when disrupting
a potable water line.
• Due to the varieties of home
design, not all installation
configurations can be addressed in
this guide.
• Improper sequence of equipment
will affect performance and could
damage your system.
When installing:
• Properly tighten all fittings to
ensure a leak-free assembly.
• Allow a minimum of 2 1/2" clear
space below unit to facilitate
filter change.
• Support filter with bracket
supplied and support pipe
with pipe hangers.
NEED HELP? GIVE US A CALL 877.333.7108
INSTALLATION GUIDE
22
PRECAUTIONS
Ensure operating pressures are within filter
housing specifications. Some installations may
require a pressure reducer installed before filter
system to reduce operating pressures.
READ ALL PRECAUTIONS AND INSTALLATION INSTRUCTIONS CAREFULLY.
Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection before or after the system.