4
FRONT PANEL
FRONT PANEL
POWER SWITCH
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power.
The Switcher will remember that last state during a power cycle.
When power is removed and resorted, the last con
fi
guration will be evoked.
INPUT STATUS DISPLAY
Input sources 1 to 8 LCM illuminates blue to indicate that a video source is present on that input.
OUTPUT STATUS DISPLAY
Each Output (destination) Channel shows which input (source) is assigned.
IR SENSOR
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
DESTINATION SELECT BUTTONS
Separate outputs 1 thru 8 select buttons are provided for each destination assignment. Routing can be Source to Destination or one
source to multiple destinations.
Example : Press Destination 1,3,5 then press Source 2 will route Input 2 to Output 1,3,5 respectfully.
EDID MODE SELECT BUTTONS
Used to select EDID mode using buttons #1 thru #2
SOURCE SELECT BUTTONS
Separate inputs 1 thru 8 select buttons are provided each source selection.