A-Neuvideo ANI-0108POE, Инструкция по эксплуатации

Страница: 7 / 12

5
EDID Description
EDID Control
Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess
what resolutions and features are available. The source can then cater its output to send only resolutions and features that are compatible
with the attached device/display. This information is called EDID (Extended Display Information Data). A source device can only accept
and read one EDID from a connected device/display. Likewise, the source can only transmit one resolution to be used by the connected
device/display. The EDID switch allows for EDID learning or for an EDID pre-set to encourage a “handshake” between the display and
source.
Manual EDID Learning Mode
When you switch to any number from “0-8” , the Transmitter will set a fixed EDID to the source. For a
detailed EDID description, please refer to the EDID table.
Auto EDID Learning Mode
When you switch to “9” , the Transmitter will copy the HDMI LOOP output and display EDID to source.
ATTENTION: Please confirm that the extender is working normally before modifying the EDID. When you want to modify the EDID,
change the EDID setting to the corresponding number first and then power cycle the Transmitter.
DIP SWITCH EXAMPLE: The BLACK rectangles are used to represent the Dip Switch pegs. In this example all the pegs are
in the DOWN position showing position 0 for 1080p, 2CH Audio setting. Use the examples below to set the Dip Switch position
for manual EDID settings on the unit.
EDID TABLE:
POSITION
EDID DESCRIPTION POSITION EDID DESCRIPTION
1080p, 2CH AUDIO 3D, 1080p, HD AUDIO
1080p, DOLBY/DTS 5.1 Copy EDID from the Transmitter HDMI loop out
1080p, HD AUDIO 1080p, 2CH AUDIO
1080i, 2CH AUDIO 1080p, 2CH AUDIO
1080i, DOLBY/DTS 5.1 1080i, 2CH AUDIO
1080i, HD AUDIO 1080i, 2CH AUDIO
3D, 1080p, 2CH AUDIO 1080i, 2CH AUDIO
3D, 1080p, DOLBY/DTS 5.1 1080i, 2CH AUDIO
A NEU VIDEO