A-Neu Video ANI-0108POE-AU, Инструкция по эксплуатации

Страница: 9 / 16

7
ASCII COMMANDS
ASCII Commands
The product also supports ASCII command control. Connect the SERVICE port of the product to a PC with an USB cable. Then, open
a Serial Command tool on PC to send ASCII commands to control the product. The ASCII command list about the product is shown as
below.
SERIAL PORT PROTOCOL:
Baud rate: 115200 x - Parameter 1 s = Set command
Data bits: 8 bit y - Parameter 2 r = Report command
Stop bits: 1 ! - Delimiter
Check bit: 0
COMMAND CODE FUNCTION DESCRIPTION EXAMPLE FEEDBACK DEFAULT SETTING
POWER
s power z! Power on/off the device,
z=0~1 (z=0 power off, z=1 power on)
s power 1! Power ON
System Initializing...
Initialization Finished!
power off
POWER 0
POWER ON
r power! Get current power state r power! power on/power off
s reboot! Reboot the device s reboot! reboot
SYSTEM SETUP
help! List all commands help!
r type! Get device model r type! ANI-0108POE-AU
r status! Get device current status r status! Get the unit all status:
power, beep, lock, in/out
connection, video/audio
crosspoint, edid, scaler,
network status
r fw version! Get Firmware version r fw version! MCU BOOT: Vx.xx.xx
MCU APP: Vx.xx.xx
r link in! Get the connection status of the input
port
r link in! HDMI IN: connect
r link out y! Get the connection status of the y
output port,
y=0~8 (0=all, 1~8=CAT 1~8)
r link out 1! CAT OUT1: connect
r link loop out y! Get the connection status of the y
loop output port, y=1
r link loop out 1! HDMI LOOP OUT: connect
s reset! Reset to factory defaults s reset! Reset to factory defaults
System Initializing...
Initialization Finished!
FW version x.xx.xx
OUTPUT SETTING
s hdmi stream z! Set HDMI loop output stream on/off
z=0~1 (0: disable,1: enable)
s hdmi stream 1! Enable HDMI loop out
stream
Disable HDMI loop out
stream
ENABLE
s cat y stream z! Set CAT output y stream on/off,
y=0~8 (0=all)
z=0~1 (0: disable,1: enable)
s cat 1 stream 1!
s cat 0 stream 1!
Reset to factory defaults
System Initializing...
Initialization Finished!
FW version x.xx.xx
A NEU VIDEO