A-Neu Video ANI-0104POE-AU, Инструкция по эксплуатации

Страница: 9 / 16

7
ASCII COMMANDS
ASCII Commands
The product also supports ASCII command control. Connect the SERVICE port of the product to a PC with a USB -to- USB Micro-B cable.
Then, open a Serial Command tool on PC to send ASCII commands to control the product. The ASCII command list about the product is
shown as below.
SERIAL PORT PROTOCOL:
Baud rate: 115200 x - Parameter 1 s = Set command
Data bits: 8 bit y - Parameter 2 r = Report command
Stop bits: 1 ! - Delimiter
Check bit: 0
COMMAND CODE FUNCTION DESCRIPTION EXAMPLE FEEDBACK DEFAULT SETTING
POWER
s power z! Power on/off the device,
z=0~1 (z=0 power off, z=1 power on)
s power 1! Power on
System Initializing...
Initialization Finished!
FW version x.xx.xx
POWER ON
r power! Get current power state r power! power on/power off
s reboot! Reboot the device s reboot! reboot
SYSTEM SETUP
help! List all commands help!
r type! Get device model r type! ANI-0104POE-AU
r status! Get device current status r status! Get the unit all status:
power, in/out connection,
edid mode
r fw version! Get Firmware version r fw version! MCU BOOT: Vx.xx.xx
MCU APP: Vx.xx.xx
r link in! Get the connection status of the input
port
r link in! HDMI IN: connect
r link out y! Get the connection status of the y
output port,
y=0~4 (0=all, 1~4=CAT 1~4)
r link out 1! CAT OUT1: connect
r link loop out y! Get the connection status of the y
loop output port, y=1
r link loop out 1! HDMI LOOP OUT: connect
s reset! Reset to factory defaults s reset! Reset to factory defaults
System Initializing...
Initialization Finished!
FW version x.xx.xx
OUTPUT SETTING
s hdmi stream z! Set HDMI loop output stream on/off
z=0~1 (0: disable,1: enable)
s hdmi stream 1! Enable HDMI loop out
stream
Disable HDMI loop out
stream
ENABLE
s cat y stream z! Set CAT output y stream on/off,
y=0~4 (0=all)
z=0~1 (0: disable,1: enable)
s cat 1 stream 1!
s cat 0 stream 1!
Enable CAT output 1 stream
Disable CAT output 1
stream
Enable CAT all outputs
stream
Disable CAT all outputs
stream
ENABLE
A NEU VIDEO