Network Camera User’s Guide
38/96
PPPoE
PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows your device
with xDSL or cable connects with broadband network directly, then your device can dial
up and get a dynamic IP address. For more PPPoE and Internet configuration, please
consult your dealer or ISP.
The device can directly connect to the xDSL, however, it should be setup on a LAN
environment to program the PPPoE information first, and then connect to the xDSL
modem. Power on again, then the device will dial on to the ISP connect to the WAN
through the xDSL modem.
The procedures are
• Connect to a LAN by DHCP or Fixed IP
• Access the device, enter
Setting
Network
PPPoE
as below
PPPoE:
To enable or disable the PPPoE service here.
User name:
Type the user name for the PPPoE service which is provided by the ISP.
Password:
Type the password for the PPPoE service which is provided by the ISP.
Содержание 2M Tiny Cube
Страница 1: ...H 264 2M Multi Profile Tiny Cube Network Camera User s Manual Firmware Version 6 B x...
Страница 48: ...Network Camera User s Guide 48 96...
Страница 95: ...Network Camera User s Guide 95 96 Click Details Select Universal Plug and Play Click Ok...
Страница 96: ...Network Camera User s Guide 96 96 Click Next Please wait while Setup configures the components Click Finish...