A. Menarini Diagnostics Glucomen LX PLUS, Руководство пользователя

Страница: 30 / 64

30
GlucoMen LX PLUS - 42338 - 09/10
UK
6. GLUCOSE TESTING
h. The result is automatically stored into memory.
i. Press the Left/Right buttons to move between marked ( ) or unmarked results.
l. Press the Mode button to save the Marking Status: Marked ( ) or Unmarked.
Note:
if test result is above 33.3 mmol/L, the screen displays HI; if test result is below 1.1 mmol/L, the
screen displays LO.
Warning: excessive squeezing should be avoided, as hemolysis may lead to inaccurate results.
Warning: your lancing device is for your personal use only. DO NOT share with others. sharing the lancing device
or lancets can transmit very serious infections. To avoid accidental needle-stick injuries, do not store used lancets
in the device after testing or arm the lancing device with a new sterile lancet unless ready to use.
Warning: lancets are for one-time use only. use a new, sterile lancet each time you test. Test different areas on
your fingertips to avoid developing calluses. Remove the used lancet from the lancing device.
Warning: discard the used lancets in accordance with local regulations for biohazardous waste.
Warning:
cleaning of the puncture site is important.
Note:
if the sensor is removed before you start the test, the screen goes blank.
Note:
if a test is not performed within 2 minutes from the insertion of the sensor, the screen goes blank. To
perform a test, take out then replace the sensor starting from step a.
Note:
the Blood Drop symbol flashes on and off repeatedly until sufficient blood has been added to the sensor.
Note:
the meter will time out after 2 minutes of non-use or if the sensor is removed. The keys are disabled until a
sensor is inserted. Results and marking status are saved if the meter times out, the sensor is removed, or the meter
is turned off.
6. GLUCOSE TESTING