For OS of Microsoft Windows 2000, XP:
1. Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
2. Move mouse and double-click the right button on
Network and Dial-up Connections
icon. Move mouse and double-click the
Local Area Connection
icon. The
Local
Area Connection
window will appear. Click
Properties
button in the
Local Area
Connection
window.
3. Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it; otherwise go to step 6.
4. Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5. Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
after the TCP/IP installation.
6. Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7. Select
Specify an IP address
and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8. Click OK to completes the IP parameters setting.
For OS of Microsoft Windows NT:
1. Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
2. Move mouse and double-click the right button on
Network
icon. The
Network
window will appear. Click
Protocol
tab from the
Network
window.
3. Check the installed list of
Network Protocol
window. If TCP/IP is not installed, click
the
Add
button to install it; otherwise go to step 6.
4. Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5. Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
after the TCP/IP installation.
6. Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7. Select
Specify an IP address
and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8. Click OK to complete the IP parameters setting.
Содержание WNAPc
