RRAP GIGABIT WLAN ROUTER
Quick Installation Guide
More information, guides and updates can be found from Internet
https://www.alinetrade.com
Package includes:
-
RRAP –router
- Power adapter
-
Installation guide
- Network cable
Connectors / Ports:
1.
WAN port: Connect your xDSL or cable modem to this port by
Ethernet cable.
2.
LAN 1 – 4 ports: Connect your PC to these ports by Ethernet cable
3.
WPS button: Press 5 seconds to start WPS function
4.
Reset button: Press 7 seconds for reset to factory defaults
5.
Power button: Turn power OFF and ON
6.
Power connector: Insert provided power adapter to this connector
7.
USB port: Use this port to connect USB modem or USB memory
Installation requirements:
-
Place the product to horizontal and flat base
-
Keep the product away from heating devices
-
Do not keep product in dusty or wet place
Front panel led’s/functions:
1.
Power LED:
ON = Power is ON
OFF = Power is OFF
2.
WAN LED:
ON = WAN port connected
Flashing = data traffic on network (WAN)
OFF = WAN port is not connected
3.
LAN 1 – 4 LED:
ON = LAN port connected
Flashing = data traffic on network (LAN)
OFF = LAN port is not connected
4.
2.4GHz WLAN LED:
OFF = 2.4GHz Wireless network not activated
Flashing = 2.4GHz Wireless network is activated and ready
5.
5GHz WLAN LED:
OFF = 5GHz Wireless network not activated
Flashing = 5GHz Wireless network is activated and ready
6.
WPS LED:
Fast flashing = WPS function enabled for 2 minutes
OFF = WPS function disabled
