A-iPower PWE1600, Руководство пользователя и инструкции по эксплуатации

Страница: 14 / 60

Disconnect the machine from the power source before making any repair. To avoid unnecessary
disappointments, you should check the following before connecting us:
Trouble Shooting
12
Problems Causes
^ŽůƵƟŽŶƐ
Machine refuses to
start 1. Machine is not plugged in
2. Defec ve socket
3. Defec ve extension cable 1. Plug in again
2. Try another socket
3. Try without the extension cable
Fluctuating pressure 1. Check if hoses and connec ons are
air ght
2. Clean or replace
Machine stops 1. Incorrect mains voltage
2. Thermal cut-out ac vated
3. Nozzle is par ally blocked 1. Check if the mains voltage
corresponds to speci ca on of this
machine
2. Leave the washer for 5 minutes to
cool down
3. Clean the nozzle
Machine pulsating 1. Air in inlet hose
2. Inadequate tap water
supply
3. The nozzle is par ally
blocked
4. The water lter is clogged
5. Hose kinks 1. Run the machine with trigger
opening un l regular working
pressure resumes
2. Check if the water supply
corresponds to speci ca ons
required
3. Avoid using long, thin hoses
(min.1/2")
4. Clean nozzle with cleaning pin
5. Clean the lter
6. Straighten out hose
Machine often starts
and stops by itself Pump/spray gun is leaking Connect your nearest service
Machine starts, but no
water comes out 1. Pump/hose or accessory is
frozen
2. No water supply
3. Water lter is blocked
4. Nozzle is blocked 1. Wait for pump/hose or accessory to
thaw
2. Connect water supply and turn on
3. Clean the lter
4. Clean the nozzle
1. Sucking pump leaks
2. Valves are dirty, worn out
or stuck
3. Pump seals are worn out