A.H. Systems AK-40G, Руководство по эксплуатации

Страница: 9 / 20

A.H. Systems AK-40G Antenna Kit
©
A.H. Systems inc.
– REV C
9
perpendicular to the ground. Connect a cable between the antenna
connector and the receiver. NOTE: BE SURE TO USE A CABLE RATED
FOR HIGH FREQUENCY WHEN OPERATING ABOVE 5 GHz (for example,
the SAC-18G-3 or SAC-40G-1.5).
MAGNETIC LOOP ANTENNA
SAS-560 Magnetic Loop Antenna 20 Hz - 2 MHz
The loop antenna does not require any assembly.
Operation: The loop antenna is designed to be held by hand and moved
around each surface if the EUT to measure magnetic radiation. Connect the
antenna via a cable to a receiver with either a 50-ohm input or high
impedance (10 K ohm or greater) input. Calibrations for both inputs are
provided.
CURRENT PROBES
BCP-610 LF Current Probe 20 Hz - 20 MHz
BCP-611 HF/VHF Current Probe 10 kHz - 150 MHz
The current probes come ready for use.
Operation: The two current probes measure conducted emissions when
clamped around a single conductor, cable or a bundle of conductors.
Disconnect the probe latch Position the probe around the conductor and
close the probe. Reconnect the probe latch to ensure that the probe is tightly
closed. Connect the probe connector to the receiver with a cable. The probe
calibrations supplied are into a 50-ohm receiver.
TRIPOD AND MOUNTING ADPTERS
ATU-510 Tripod
AEH-510 Azimuth and Elevation Head
The azimuth and elevation head (AEH-510) mounts to the tripod (ATU-510)
top and allows the antennas to be rotated 360 degrees and tilted between
horizontal and vertical polarization. The tripod and azimuth and elevation
head come in their own carrying case. Each tripod leg is independently
adjustable in angle and length to facilitate antenna height setting. The tripod
legs have a rubber tip on one end for indoor or hard surface use, and a metal
spike on the other end for outdoor soft surface (such as dirt) use.
TRANSIT STORAGE CASES
TCC-511 Tripod Carrying Case
TSC-542 Transit Storage Case
The antenna carrying case (TSC-542) prevents damage and loss of
antennas when storing or transporting the antenna kit. The case is
constructed of lightweight and durable polyethylene. Two case keys are
provided with the case.