A.H.Beard Genius, Руководство пользователя

Страница: 17 / 20

15
SERIAL PORT SERIAL PORT
Unplug base from power source .
Disconnect the power-down box cable from each control box . Make
note where the cable was plugged in .
Connect the male end of each sync cord to control box . Insert it into
the same port that you disconnected the power-down box from in
Step 2 .
Connect each power-down box male connection to the sync cord
female connection (Refer to the illustration below) .
Plug base back into the power source .
Check to ensure all cords are securely attached . Both remotes will
now operate both bases simultaneously (If the remotes become
unpaired, see page 13) .
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Power-Down Box Power-Down Box
Sync Cord
Splitter
Splitter
Control Box
Control Box
If simultaneous operation of two bases is desired, use the SmartSync
™
Cord to connect the
electronics of both bases together.
setting up two bases