Use instructions
Biogas analyser ABE_1500
8
3.1
Principal characteristics
ABE_1500
analyser for methane (CH4), Carbon oxide (CO2), Carbon
monoxide (CO), and oxygen in biogas.
Measure camps 0-100% in volume for CH4, 0-100% in volume for CO2,
0-20000 ppm for CO, 0-25% in volume for O2.
3.2
Oxygen sensor
Utilized sensor (max_250) of electrochemical type; utilize an alkaline material
insensible to carbon anhydride (gas who poison traditional electrochemical sensory,
reducing theirs during). Operative life of sensory change favourably of percentage of
oxygen measured (whit air to 20,93% of oxygen, standard during of sensory is of 2
years), whit percentage of oxygen less of 5%, it augments until 4/5 years (in case of
clean and not damp gas).
3.3
Methane Sensor, Carbon Anhydride, Carbon Monoxide
The sensory utilize a source of impulsive emission of infrared to low temperature.
Methane, Carbon Anhydride and Carbon Monoxide, presents an high coefficient of
absorbition of infrared light, the sensory read this attenuation when inside of
measures room, are the gas in question and it’s possible draw the concentration of
respective gas.
3.4
Options
Code
Describing
ABE_1500
Analyser for oxygen, methane, carbon anhydride, carbon monoxide
ABE_550
Gas speed velocity measure for flow reading 0 - 42 m/sec
ABE_553
Software for configuration and dates reading on PC
ABE_570
Analyzer case
ABE_580
Sensor H2S 0-500 ppm
ABE_581
Sensor NH3 0-1000 ppm
ABE_582
Sensor CO 0-1000 ppm