A & H AMFLOW A6, Быстрый старт, Страница: 15 / 17

A6 Quick Start: H1
SAFETY
Copyright
©
2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-013 * Rev. A, 07/16 Page 15 of 17
AMFLOW
®
Safety
SAFETY INFORMATION
Usage

Use products only within range of pressure and temperature conditions
indicated on product data sheet.

Do not use with chemicals which are incompatible with 316SS or with
seal materials.

Equipment is certified for Group 2 Category II.

Equipment should not be used in systems requiring a higher level of
certification.
Faults and Damage
The safety features and integrity of products may be compromised by any of the
following:

External damage to body.

Exposure to pressure loads in excess of maximum rated pressure.

Maintenance performed by improperly trained personnel.
Protection from Pressure Releases

To avoid injury due to release of high pressure, use only adaptors and
fittings rated to withstand appropriate pressure.

Ensure all adaptors and fittings are securely connected.

To avoid a violent release of pressure, slowly bleed off pressure before
attaching or removal from pressure line.
Avoid Mechanical Damage

Caution must be observed not to damage any threaded components
during maintenance procedure.

Such damage could compromise the pressure safety factor of filter.

When replacing seals, care must be exercised to avoid damage to
sealing surfaces.

Damage could lead to a sudden release of pressure during
operation.