9dot LiteSync, Руководство пользователя

Страница: 10 / 17

10
LITESYNC MANUAL VER. 2 REV. 0
Before turning on the device it is advisable to connect the ground terminal, fix the chassis to the cabinet or to the wall, insert
the chosen GigaKey keys and connect the signal cables, in particular:
• Ethernet cables.
• Coaxial cable and GPS antenna or cable with RJ12 connector (in case you need to acquire the sync pulse).
• Wire up the power supply (optional standalone power supply ACDC-48 or ACDC-24 supplied by 9dot).
• Connect the power supply pins of the power supply paying attention to the polarity adopted.
• Connect the power supply to the electricity.
These cables are not supplied with LiteSync and must be purchased separately
3
.
Physical interface
LED coding
General state of the unit
To know the general status of LiteSync, consider the first 3 LEDs arranged vertically on the left of the front.
LED Color Description
GPS green flashing 200ms presence of the synchronization pulse from integrated GPS
AUX green flashing 200ms presence of the sync pulse from the SYNC INPUT port
STATUS Blue fixed properly functioning device
Table 1 - general status indication LEDs
Legend LED 1 and LED 2
Color Description
Red flashing port disabled due to a short circuit
Red GigaKey inserted incorrectly or invalid
Violet flashing GigaKey is missing
Blue flashing port enabled, no load connected
Blue port enabled with Cambium Sync and load detected
Table 2 - LED indications on the cartridge
3
Consultare la sezione “Antenna GPS” per vedere gli accessori venduti da 9dot