8
Introduction
Congratulations on purchasing your new spotlight. Read
this Instruction Manual and follow the instructions carefully
before using your new spotlight.
Reading the battery/charge
status LED indicator
The battery/charge status LED indicator lights solid green
to indicate the battery is charged; solid red to indicate
the battery is operating at low voltage, and needs to be
recharged.
The battery/charge status LED indicator flashes red while
the unit is charging using the AC charging method. It will
light solid green when the unit is fully charged.
Charging/recharging the spotlight
Charging/recharging using the
240V AC plug pack charger
•
Make sure the spotlight is off (the trigger lock is in the off
position and the trigger is not depressed).
•
Insert the barrel connector of the 240V AC plug pack
charger into the AC-to-DC charging port on the back of
the unit. Insert the 240V ac Plug pack into a house hold
power outlet and turn on. The battery status LED flashes
red.
•
Charge until the battery status LED lights green
(approximately 7 to 8 hours).
Charging/recharging using the 12 volt DC charger
IMPORTANT:
The battery/charge status LED does not light
or flash when the unit is charging using the DC charging
method.
•
Make sure the spotlight is off (the trigger lock is in the off
position and the trigger is not depressed).
•
Plug the double pin tip of the supplied 12 volt DC charger
into the 12 volt DC power and charging port on the back
of the unit.
•
Insert the 12 volt DC plug end into the accessory outlet of
your vehicle or other 12 volt DC power source.
•
Charge for approximately 5 hours.
Note:
When using a vehicle’s 12 volt DC accessory outlet
as a charging source, be aware that some vehicles require
you to turn on the ignition to power the accessory outlet.
WARNINGS:
•
To avoid the risk of property damage, charge up to
8 hours
maximum
using the ac charging method; up to
5 hours
maximum
using the dc charging method.
•
Never attempt to use the ac charger and dc charging
port simultaneously.
Operating instructions
Operating the spotlight
IMPORTANT:
While most HID spotlights take several
minutes to achieve optimal brightness, this spotlight will light
dimmer for approximately 15 seconds, then brighten slightly
to the correct brightness level. It was designed this way to
function quickly; the slight dimming is not a malfunction.
1. Disconnect from charger.
2. The on/off trigger is located in the front of the handle of
the spotlight.
3. To turn the spotlight on, squeeze the trigger.
4. To turn off the spotlight, release the trigger.
Note:
The on/off trigger can be locked in the on position
using the trigger lock switch on the side of the unit.
Operating the unit corded
Plug the double pin tip of the supplied 12 volt DC adapter
into the 12 volt DC power and charging port. Insert the 12
volt DC plug end into the accessory outlet of your vehicle or
other 12 volt DC power source. Operate the unit as outlined
in the previous section.
Note:
When the 12 volt DC adapter is not in use, stores the
12 volt DC plug in the storage compartment located at the
bottom of handle.
Содержание SL2443
Страница 1: ...INSTRUCTION MANUAL SL2443 Compact HID Spotlight ...
Страница 11: ...11 ...
Страница 12: ......