background image

4

General safety warnings and instructions 

Read all instructions
WARNING:

 Read all instructions before operating spotlight. 

Failure to follow all instructions listed below may result in 

electric shock, fire and/or serious injury.

 

  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance by a person 

responsible for their safety.

 

  Children should be supervised to ensure that they do 

not play with the appliance.

Safety guidelines / definitions
DANGER:

 Indicates an imminently hazardous situation 

which, if not avoided, will result in death or serious injury.

WARNING:

 Indicates a potentially hazardous situation 

which, if not  avoided, could result in death or serious injury.

CAUTION:

 Indicates a potentially hazardous situation 

which, if not avoided, may result in minor or moderate injury.

CAUTION:

 Used without the safety alert symbol indicates 

potentially hazardous situation which, if not avoided, may 

result in property damage.

Risk of unsafe operation.  

When using tools or equipment, basic safety precautions 

should always be followed to reduce the risk of personal 

injury. Improper operation, maintenance or modification 

of tools or equipment could result in serious injury and 

property damage. There are certain applications for 

which tools and equipment are designed. Manufacturer 

strongly recommends that this product NOT be modified 

and/or used for any application other than for which it was 

designed. Read and understand all warnings and operating 

instructions before using any tool or equipment.

Important safety instruction

Instructions pertaining to a risk of fire, electric shock, 

exposure to excessive uv radiation, or injury to persons
Lighted lamp is HOT.
WARNING: to reduce the risk of fire, electric shock, 

exposure to excessive uv radiation, or injury to 

persons: 

   Turn off/unplug and allow to cool before replacing the 

Halogen bulb.

   Halogen bulb gets HOT quickly!

   Do not touch the bulb at any time when operating.

   Only contact switch/plug when turning on.

   Do not touch hot lens or enclosure.

   Do not remain in light if skin feels warm.

   Use only with a 12Volt/100watt or smaller halogen bulb.

   When changing bulb, use a soft cloth. Oil from skin may 

damage bulb.

   Do not operate the spotlight with a missing or damaged 

lens or enclosure. 

WARNING – when using electrical appliances, basic 

precautions should always be followed, including the 

following:

   To reduce the risk of injury, close supervision is 

necessary when the spotlight is used near children.

   Use only attachments recommended or sold by the 

manufacturer.

WARNING: to reduce the risk of electric shock:

   Do not put spotlight in water or other liquid. Do not place 

or store appliance where it can fall or be pulled into a tub 

or sink.

   Do not clean this appliance with a water spray or the like.

   Use only the charger supplied by the manufacturer to 

recharge.

Содержание RL3003













Отзывы: