3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Tool is listed by Underwriters Laboratories
and listed to Canadian Standards by
Underwriters Laboratories
Specifications
Voltage:
120V ~ 60Hz
Power rating:
15 Amp
No load speed:
5000 min
-1
Blade diameter:
7 1/4" (185mm)
Blade teeth:
24 TCT
Blade arbour:
5/8" (16mm)
Blade kerf:
1/8" (2.8mm)
Bevel capacity:
0° to 55°
Depth of cut at 90°:
2 3/8" (60mm)
Depth of cut at 45°:
1 7/8" (42mm)
Depth of cut at 55°:
1 3/10" (34mm)
Laser type:
Class 2, mains operated
Electrical insulation:
Double insulated
Tool weight:
11.9 lbs (5.4kg)
This tool is double insulated. There are two independent
barriers of insulation to protect you from the possibility of
electric shock.
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary.
Introduction
Your new 909 power tool will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new 909 Power Tool. Take
special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
WARNINGS.
1. Do not attempt to change the position of the laser under
any circumstances, it has been set at the factory and is
accurately focused on the centre of the saw blade.
2. It may be more difficult to see the laser line in conditions
of bright sunshine and on certain surfaces.
E205892
