A U D I O C O D E S Q U I C K S T A R T G U I D E
Installing your AudioCodes ATA
Connect your device using the ports on the back panel. You need either an analog phone or a fax machine with an analog phone to
activate your device using any of the FXS ports. After connecting the necessary ports, you are ready to use your ATA.
• Use the
FXS
port to connect an analog phone (or fax machine) with an RJ-11 telephone cable (for MP112, MP114, and MP118) or
with an “Amphenol” connector (for MP124).
• The
Internet
port connects to a spare switch port on your router, your cable or DSL Broadband Modem, or a standalone multi-
port Ethernet switch device.
• The
Power
port is where you connect your AC power cable.
Label
Component Description
100-240~0.3A
max. 50-60Hz
AC power cord socket
Ethernet
10/100Base- TX Uplink socket.
RS-232
RS-232 status port (requires a DB-9 to PS/2 adapter).
Note
: MP-112 does not provide a serial port.
FXS
Provides two, four, or eight FXS ports (depending on MediaPack model).
Note
: MP-112 does not support FXO interfaces.
Reset
Reset button for resetting the device.
