8level DVR-AHD-081-1, Инструкция по установке и эксплуатации

Страница: 37 / 39

There has 2 kinds of upgrade method: 1.USB upgrade 2.FTP upgrade.
Please read the upgrade instructions carefully before upgrade.
1. USB Upgrade
Operation steps:
1. Copy the upgrade.bin to the U disk.
2. Plug into the USB disk on the back of the DVR, right click the mouse, then pops out the tip,
and confirm it.
3. The host says “Local upgrading...”.
4. When the upgrade have been finished, the host will pops out “Local upgrade was successful!”, that
indicates the upgrade is successful, then the host will restart automatically.
5. The DVR administrator password will not change after upgrading.
2. FTP upgrade
Operation steps:
1. Open the FTP server software, configure it follow the setup wizard. Create user name
and password in server. Set the root directory (the folder which will place upgrade file), set
the permission (must set the download permission ).
2. Enter server after configuration. Set the FTP server IP and port.
3. Start FTP service.
4. Click “System Maintenance” -> “Upgrade Management” -> “FTP upgrade”, set the DVR
information as below:
Userame = the username which create in step1.
Password = the password which create in
step1. Port = the server port which set in step2.
Server address = the server IP which set in step2.
File path = the location where you place the upgrade file. If you set the D:\ as the root directory,
then the upgrade.bin directory is D:\70XX\upgrade.bin, so the file path is\70XX\upgrade.bin,