manualshive.com logo in svg

8e6 Technologies Threat Analysis Reporter TAR 1.0, Быстрый старт, Страница: 33 / 54

Поделиться
Скачать
8e6 Technologies Threat Analysis Reporter TAR 1.0 Скачать руководство пользователя страница 33

8

e

6 T

hreaT

 a

nalysis

 r

eporTer

 Q

uick

 s

TarT

 G

uide

 

 

Step 2: Physically Connect the Unit to the Network

After performing initial setup procedures for the Threat Analysis Reporter, the unit should 

be physically connected to the network. This step requires a standard CAT-5E cable to 

connect the unit to the network. An additional CAT-5E cable is required if the Ethernet 

Tap unit will be installed for bandwidth monitoring.

A.  Plug one end of a standard CAT-5E cable into the Threat Analysis Reporter’s LAN 1 

port, the port on the left.

Rear of the “S” and “MSA” chassis

Rear of the “H” chassis

B.  Plug the other end of the CAT-5E cable into an open port on the network switch.

Bandwidth Management

If you choose to install the Ethernet Tap for bandwidth monitoring, you will need to con-

nect it to the Threat Analysis Reporter at this point. Refer to Appendix A at the end of this 

document for instructions on how to connect the Ethernet Tap unit.

Содержание Threat Analysis Reporter TAR 1.0























































Отзывы:

Нет отзывов