8
8
e
6 T
hreaT
a
nalysis
r
eporTer
Q
uick
s
TarT
G
uide
ER:
Respond to the question “Do you have an Enterprise Reporter?” by clicking the radio
button corresponding to either “Yes” or “No”.
If “No” was selected, click
SAVE >
at the bottom right of the screen to go to Step 3.
If “Yes” was selected, the IP address and Server Name fields display in place of the
radio buttons. The < Back button displays above the Server Name field.
NOTE:
To change your answer from “Yes” to “No,” click the
< Back
button to
re-display the question “Do you have an Enterprise Reporter?”
A. Enter the
IP address
of the ER server to be used with the Threat Analysis Re-
porter. In our example, this is:
200.10.101.76
.
B. Enter the
Server Name
of the ER server to be used with the Threat Analysis
Reporter. In our example, this is:
er4logo
.
C. Click
SAVE >
at the bottom right of the screen to save all settings entered during
the wizard process, and to go to Step 3.
NOTE:
Upon clicking
SAVE >
the wizard will verify whether the settings made
in Step 1 and Step 2 are correct. If there is an error in any entry made, an orange
asterisk flashes beside the field in which the error was made. Correct the error and
click
SAVE >
again to go to Step 3.
•
•
