8e6 Technologies ER3-100 (5K02-55) Скачать руководство пользователя

Страница: 68 / 74

6 e

nterprise

eporter

uick

tart

uide

6 e

nterprise

eporter

uick

tart

uide

ppendix

: san i

nstallation

D. Plug the other end of the CAT-5E crossover cable into the storage device’s port “0”

(zero) on the right (see Figure 3 Item B).

E. Plug the storage device’s AC power cords into the back of the unit (see Figure 3 Item

C).

F. Plug the loose ends of the AC power cords into a power source with an appropriate

rating. It is strongly suggested you use an uninterruptible power supply.

WARNING:

Be sure

all

drives are installed in the storage device unit before

powering on the unit. Be sure the ER unit is

not

powered on.

G. Turn on the power switches at the back of the storage device,

which are positioned to the right of the power cord connectors.

The boot-up process may take up to 5 minutes. When the unit

is booted up, the three vertical LED lights at the left of the front

panel will be lit up (see Figure 4).

Once all LED lights are lit, the ER can be powered on.

Shut Down, Restart Procedures

Follow the procedures in this section if you need to shut down or

restart the storage device.

Shut Down the Storage Device Unit

If you need to shut down the storage device, always follow these

steps:

Figure 4: LED

display

A. Power off the ER unit first. (Refer to the Physically Connect the ER to the Network

sub-step in Step 1B of the ER section for shut down procedures.)

B. Power off the storage device next by turning off both switches in the back of the unit.

Restart the Storage Device Unit

The storage device must be restarted after a power failure. In this instance, the storage

device may already be turned on, but needs to be booted up again.

WARNING:

You must

always

power on the storage device

before

powering on

the ER unit. Since the storage device is an information database, if you experience

a power interruption or if you power off the storage device without going through

the standard shut down procedures, you may lose data and/or damage the file

system.

To restart the storage device, press the power button on the front panel. The boot-up

process may take up to 5 minutes.

Содержание ER3-100 (5K02-55)











































































Результаты поиска

Содержание ER3-100 (5K02-55)

Отзывы:

Похожие инструкции для ER3-100 (5K02-55)

Бренды по названию

Популярные бренды

8e6 Technologies ER3-100 (5K02-55), Быстрый старт

Результаты поиска

Содержание ER3-100 (5K02-55)

Отзывы:

Похожие инструкции для ER3-100 (5K02-55)

Бренды по названию

Популярные бренды