3
8
e
6 R3000 Q
uick
S
taRt
G
uide
C. Plug the R3000 into a power source with an appropriate rating.
WARNING:
It is strongly suggested you use an uninterruptible power supply.
D. Power on the R3000. on a 1U unit, drop down the face plate and
press the large button at the right of the front panel (see image
below).
Front of the 1U chassis (left) and mini tower (right)
on a mini tower unit, press the large black button at the top of the
front panel (see image to the right).
The Boot Up Process
the boot-up process may take 5 - 10 minutes. when the drive light remains off for 30
seconds, the system is booted up. (See the LeD indicators and Buttons section for a
description of front panel LeD indicators and buttons.)
if you wish to verify that the unit has been booted up, you can perform the following
test on your workstation:
1. Go to your taskbar and click Start > Run.
2. in the dialog box, type in
cmd
(type in
command
if using windows Me).
3. Click
OK.
4. in the cmd.exe window, type in
ping 1.2.3.4
5. Press
Enter
on your keyboard.
if you receive a reply, the unit is up.
Содержание Enterprise Filter Authentication R3000
Страница 65: ...8e6 R3000 Quick Start Guide 61...
