80/20 Xtreme DIY Garden Box, Быстрый старт

Страница: 3 / 4

To install lid onto
base, use hinges
(2) and fastener
DD (8) and EE (8).
Attach half of hinge
on lid and half on
back T-slot of base.
AA Single Tab End Fastener x16
BB 5/16-18 x .750” SHCS x2
CC 5/16-18 Economy T-nut x2
DD 1/4-20 x .625” FHSCS x8
EE 1/4-20 Drop-in T-nut x8
FF 5/16-18 x .500” BHSCS x8
Hardware for Lid Arm Top
• ¼-20 x 1.00” SHCS x1
• ¼-20 Economy T-nut x1
• ¼-20 Washer x1
Hardware for Lid Arm Bottom
• 5/16-18 x 1.00” BHSCS x2
• 5/16-18 Drop-in T-nut x2
• 5/16-18 Washer x2
Door Handle x1
Adjustable Hinge x2
Panel Gasket 53ft
End Cap x8
Tread Strip
• 3/16 Hex Wrench
• 5/32 Hex Wrench
Attach profile A of
both assemblies
together using
profile G (2) and
fastener AA (4).
Assemble one side
of the garden box by
connecting profile
B (1) and profile
C (1) to opposite
ends of profile A (1)
using preassembled
hardware. Attach to
bottom T-slot of profile A. Repeat process with
profile A (1), profile D (1) and profile E (1).
Install panel B
(1) and panel C
(1) to assembly
and cap off using
profile H (2) and
fastener AA (4).
Slide panel A (2)
into subassemblies
and cap each one
off with profile F
(2) using fastener
AA (4). Be sure to
face tab of fastener
away from panel.
To build lid, connect
profile A (2) with
profile J (1) using
fastener AA (2).
Slide panel D (1)
into U-shape. Install
handle to second
profile J (1) using
fastener BB (2) and CC (2). Cap off lid using
fastener AA (2) to connect profile J with handle.
To connect the lid
arm, take panel E
and install half into
inside T-slot of base
and half to outside
access hole on lid.
For more details,
see how-to video.
39.281”
x
1
x
1
x
2
x
1
x
1
x
2
x
4
x
2
x
2
1502 – 50.250”
1504 – 45.000”
1503 – 45.000”
1502 – 36.334”
1502 – 36.334”
1504 – 40.647”
1502 – 12.000”
1502 – 12.000”
1502 – 45.000”
Hardware
Accessories
Tools Needed
A
D
E
H
J
F
G
B
C
GARDEN BOX
ASSEMBLY INSTRUCTIONS
Arm to Lid
Finish by installing panel gasket and using
fastener FF (8) to install end caps (8). Lastly, put
tread strip in T-slots where lid and base meet.
Tip: When assembling, all closed-faced sides
of profiles should be facing outward.
Arm to Base
43.647”
48.000”
A
B
C
E
G
H
F
J
Panel D (not shown) twin wall
Polycarbonate installs into
the lid of the garden box.
1/4” Gray HDPE
1/4” Gray HDPE
1/4” Gray HDPE
1/4” Gray HDPE
Panel A
Panel B
Panel C
Panel A
Panel E