7th Sense R Series, Руководство пользователя

Страница: 6 / 36

6
M750-1 Operating R-Series Media Servers : User Guide © 2023 7thSense
Installation
After removing the two screws, pull the fascia forwards and straight off the unit. It is retained by four
push-fit fasteners. Refit the fascia after mounting. Where side access is restricted for unracking, a
7thSense tool is available to insert into the grille. Take care not to damage the grille with other tools,
or force when removing.
Secure the unit to the rack using two rack bolts to each side. Ensure that each server is properly
secured to the rack cabinet.
Replace the fascia and secure using the two screws previously removed.
Rack Stability Precautions
·
Ensure the rack is stable (e.g. bolted to the floor) before sliding out the server.
·
Do not place objects on equipment projecting from a rack (e.g. do not use as a shelf).
· Only slide out one piece of equipment from the rack at a time.
Connecting External Equipment
To ensure best performance from the server and compliance with relevant EMC regulations, this
equipment should only be used with high-quality shielded data and signal cables.
Only equipment and accessories approved to IEC 60950-1 and SELV circuits may be connected to the
server. All equipment and accessories shall comply to the relevant standard for the server’s port to
which it is connected.